Author Topic: New Oil Cooler  (Read 13560 times)

Offline chadvarner85

  • Jr. Member
  • **
  • Posts: 55
New Oil Cooler
« on: December 20, 2012, 07:48:30 am »
I was checking out the new oil cooler system and this might be a dumb question but what is the Heat sync top end cooler, and what does it do?




knoxracing

  • Guest
Re: New Oil Cooler
« Reply #1 on: December 20, 2012, 08:55:58 am »
Not sure if you looked at the add I have on e-bay or not? This is a tubular finned cooler, you will route your top end oil line from the engine in one end and from the other end you will run a line to the head. There are alot of these on the market, Fluidyne is the first one I have seen that has built it  with the fins actually continuing through the tube to the inside. The engine oil flows through the tube and the heat is dissipated through the fins. We used one made by Afco and it works very well, this Fluidyne one is way better. I hope this helps and I hope you were able to see a picture. Everytime I try to load a picture on this site it says the file is too large, not sure why?


Offline IraceLegends77

  • Hero Member
  • *****
  • Posts: 1001
Re: New Oil Cooler
« Reply #2 on: December 20, 2012, 09:10:26 am »
Couple of questions

1. will it fit on the old mounting system

2. can you post the link to the e-bay add. I can't find it.

Thanks
Scott Wilkerson #77   Vision Graphix Racing

knoxracing

  • Guest
Re: New Oil Cooler
« Reply #3 on: December 20, 2012, 09:28:04 am »
I am sorry, **** Racing Junk*****  lol not E-bay, again I am sorry about that. The heat sync does mount to the standard bracket from USLC. The new Fluidyne cooler requires two L barackets thats are super simple to make.  Add 2878836, I hope this helps!

Offline slack11

  • Sr. Member
  • ****
  • Posts: 261
Re: New Oil Cooler
« Reply #4 on: May 11, 2014, 06:45:10 pm »
Just bought this cooler, would you happen to have any pics of the way you mounted it with your own brackets?  Gonna build my own brackets, but feel like I am over engineering this........

Thanks


Offline justfreaky

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4512
Re: New Oil Cooler
« Reply #5 on: May 11, 2014, 07:49:53 pm »
Nate,

Sent you an email with a pic. Hope that helps!

Steve
Better to be hated for who you are, Than to be loved for who you are not.