Author Topic: Axle skew/cross weight dirt discussion?..  (Read 12471 times)

Offline Doug10

  • Newbie
  • *
  • Posts: 5
Axle skew/cross weight dirt discussion?..
« on: July 27, 2023, 05:50:12 pm »
Say it you have a car that enters great, good middle, loose on power off?. Axle is skew to the right for rotation coming off, running 47% cross. Would you add a few percent of cross to help with the loose off or would you square axle back up some? Both should accomplish the goal? allready soft on right rear spring, don?t wanna change that. Car is drivable and is fast but just wanna get my driver a little more confidence coming off turn. Dirt tracks with medium bite, hard, take a little rubber.




Offline justfreaky

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4512
Re: Axle skew/cross weight dirt discussion?..
« Reply #1 on: July 30, 2023, 10:18:48 am »
For loose off, stiffen RF spring, raise tire pressure on RF, increase cross weight. I run with rear end square in the chassis. Find yourself a good tight/loose chart. https://www.rjracingproducts.com/uploads/2/9/4/1/2941827/legends_car.pdf

Steve
Better to be hated for who you are, Than to be loved for who you are not.