LegendsRacer - Legends & Bandolero Racing Forum

LEGENDS => Brakes => Topic started by: IraceLegends77 on December 08, 2013, 07:06:53 pm

Title: Willwood Brakes install
Post by: IraceLegends77 on December 08, 2013, 07:06:53 pm
Does anyone know where you can find the installation directions for the new brakes? Or a picture. Thanks
Title: Re: Willwood Brakes install
Post by: Legends57x on December 08, 2013, 07:48:54 pm
Scott,

I will send you an electronic copy of Wilwood install directions tomorrow from work... :)

Mark
Title: Re: Willwood Brakes install
Post by: justfreaky on December 08, 2013, 08:17:24 pm
Mark,

Would you send me a copy also. I would like to add that to my files.
Thanks!

Steve
justfreaky@3riversdbs.net
Title: Re: Willwood Brakes install
Post by: IraceLegends77 on December 08, 2013, 09:32:13 pm
Thanks  for the help
Title: Re: Willwood Brakes install
Post by: VMS Motorsports on December 09, 2013, 08:50:57 am
They are supposed to come in the box with the kit.
The kits I sold  from USLC all had directions in them
Title: Re: Willwood Brakes install
Post by: IraceLegends77 on December 09, 2013, 09:15:46 am
I bought a used set with extra pads. It didn't have the directions with it. It is crazy how much lighter they are.
Title: Re: Willwood Brakes install
Post by: Legends57x on December 09, 2013, 01:22:28 pm
Mine came with no instructions in box either as received from dealer.  Instructions as attached.... ;D
Title: Re: Willwood Brakes install
Post by: justfreaky on December 09, 2013, 01:36:04 pm
Thank You Mark!

Steve
Title: Re: Willwood Brakes install
Post by: IraceLegends77 on December 10, 2013, 09:32:27 am
Thanks a lot Mark.
Title: Re: Willwood Brakes install
Post by: Legends57x on December 10, 2013, 05:25:52 pm
You are both very welcome!  That's why we are all here  - to help each other.  ;D
Title: Re: Willwood Brakes install
Post by: Plumcrazy on April 08, 2014, 10:06:32 pm
Sorry for  re-opening an old thread. Does anyone know where I can get more of the thin spacers?  My brakes came with 7 thin ones and 4 thick.  Anyway, it took 6 thin ones  (3 per bolt) for the one caliper and I need a few more.  :-\

While I'm at it, I assume the 90 degree fitting will go where bottom, inside, fitting is?  The instructions say to clock the fitting towards the top of the car, which makes no sense.

Thanks in advance!

Adam
Title: Re: Willwood Brakes install
Post by: LVRacer8 on April 09, 2014, 01:27:01 am

While I'm at it, I assume the 90 degree fitting will go where bottom, inside, fitting is?  The instructions say to clock the fitting towards the top of the car, which makes no sense.


Pull the sticker off the side of the caliper, that's where the fitting goes.
Title: Re: Willwood Brakes install
Post by: chadvarner85 on April 09, 2014, 07:28:52 am
I got some of the shims from Grainer.... But make sure you tell them you dont need the kitchen sink!!! I think they were like $12 for a bag full..
Title: Re: Willwood Brakes install
Post by: IraceLegends77 on April 09, 2014, 07:59:04 am
I used stainless steel washers. Worked like a champ.
Title: Re: Willwood Brakes install
Post by: s10custom on April 09, 2014, 09:10:39 am
There is a kit of different sizes. I got one from Mike at CMG. Don't remember the cost

Robert
Title: Re: Willwood Brakes install
Post by: Plumcrazy on April 10, 2014, 10:43:15 pm
Thanks all!  And Duh... On the sticker.  What a maroon...
Title: Re: Willwood Brakes install
Post by: Rodney86 on April 13, 2014, 11:03:49 pm
Can someone post pics.  The directions don't make since to me.  Course I am new to legends, but I don't see how you can get to the caliper bolts with the rotor on.
Title: Re: Willwood Brakes install
Post by: chadvarner85 on April 14, 2014, 07:35:08 am
You have to remove the rotor and hub to install that bracket.